How To Fix A MacBook Won’t Turn On Issue

How To Fix A MacBook Won’t Turn On Issue

If you’ve ever used a Windows computer for comparison, you know that Macs in general are more reliable and rarely let you down. But with technology, the inevitable happens: computers get older, internal memory wears out, battery cycles get shorter and shorter.

So if one day you wake up but your Mac doesn’t wake up, you might feel like your life has come to a halt when you think about all the work in progress, photos, documents, etc. Lost. Don’t worry, all you have to do is systematically follow a series of steps to bring your machine back to life.

Read: How To Fix MacBook Keyboard Is Not Working Issue with Simple Methods

Solutions for MacBook Won’t Turn On Issue

When your MacBook Air or MacBook Pro won’t turn on, the problem is rarely with the entire setup – it’s more likely that one of the components is misbehaving, which could range from your display to software problems. Is. Our job here is to isolate this problem to solve it.

The first step is to check, as obvious as it sounds if your Mac has any battery left (or, in the case of the iMac, if the cable is properly connected). Try unplugging and plugging your Mac back in. If you have an older MacBook, your MagSafe cable will show you a green light if the computer is charging and amber if it is still charging.

As a general rule of thumb, try to only use cables made by Apple. While they may be more expensive (check eBay or Craigslist for used items), they are more likely to be safe for your Mac and not affect your battery life. Also, don’t forget to test your outlet – you might be using a faulty outlet.

1- Boot up your Mac

Once you know that your Mac is getting proper power, try turning it on by holding down the power button. Do you hear fans or voices? If so, the problem with your Mac may be software-related. If your Mac doesn’t start at all, it may be hardware-related.

Anyhow, when your MacBook Pro or MacBook Air won’t turn on, be sure to disconnect all keyboards, mice, external hard drives, etc. To make sure they are not part of the problem. If nothing has changed, you need to power up the chakra.

2. Go through a power cycle

If you’re certain that your MacBook Pro won’t boot, a good option is to enable a power cycle, which is essentially a force restart.

To do a power cycle:

  • Shut down your Mac by holding down the power button (keep pressing)
  • unplug all power cables
  • Press and hold the power button for an additional 10 seconds
  • restart mac as usual

Hopefully, the Mac won’t turn on, now the problem is solved.

3. Rule out your display

In rare cases, it could be your screen that is causing you all the problems. Your first option should be to check all cables (if you’re on a desktop PC) for proper connections, but sometimes there can be a problem with the battery power circuit that for whatever reason, won’t trigger the screen light.

The point is, your MacBook’s black screen is still working. One way to fix the problem, especially when your MacBook won’t turn on like this, is to put your laptop in front of a bright window so the sun can shine behind your screen. That way, you should be able to see well enough to connect to it, after which your screen should turn on normally.

4. Repair Your Mac in Recovery Mode

To start recovery mode:

When you run cables to display other external inputs, it’s natural to turn next to your hard drive, which can now be broken either way. The good news is that your Mac has an easy way to fix this problem called Disk Utility, which you can access through Recovery Mode.

  • Make sure your Mac is completely turned off
  • Press and hold + R and turn your Mac back on
  • You will see a new pop-up window with a few options to choose from. Click Continue with Disk Utility.
  • Select your hard drive
  • Click on First Aid
  • Once the process is complete, turn your Mac off and on again

5. Restart Mac in Safe Mode

If you’re still having problems, it’s possible to restart your MacBook in Safe Mode to bypass several minor procedures that may be preventing your Mac from working properly.

Entering Safe Mode is easy:

  • your Mac. Stop it
  • Turn it back on while holding down the Shift key
  • release shift when you see a login menu

Now that you know the situation with your Mac isn’t serious, you’re one step closer to the finish line. Sometimes you need to restart MacBook once for everything to work fine.

6. Reset Your Mac’s NVRAM

Even when your Mac is turned off, there’s a special kind of memory that keeps track of it. This is called non-volatile random access memory (NVRAM) and can cause boot problems in very rare cases. But if you’ve already tried all of the suggestions above, this may be a very rare case.

To reset NVRAM:

  • your Mac. Stop it
  • Press and hold + Option + P + R and your Mac . turn on
  • Release the keys when you hear the second start chime

7. Reset SMC

Another essential operator in your Mac’s ecosystem is the System Management Controller (SMC). This keyboard manages the backlight, responds to you pressing the power button, manages your battery, and more.

Resetting SMC is the last thing you can do before completely reinstalling macOS:

  • If you have a MacBook, press Shift + Control + Option and turn on
  • For iMacs, just unplug the cable for 15 seconds, plug it back in, wait five more seconds, then turn on

8. Back Up With Target Disk Mode

Naturally, you don’t want to lose any of your data during a clean installation of macOS. But even if your Mac won’t start, you can still try to get the information through a hack called Target Disk Mode.

For this you need a second Mac and a Thunderbolt cable:

  • connect both macs
  • shut down your mac completely
  • Turn your Mac back on while holding down the T key until the cable icon appears on your screen
  • Your Mac’s hard drive should now appear as an external drive on the other Mac’s Finder
  • Simply copy all required files to another Mac

Hope if everything works out your files are safe!

9. Get a New macOS

The final step is to reinstall macOS, which should fix any software-related issues, for sure the MacBook Pro won’t Ignite saga.

To do this, restart your Mac in recovery mode as described above (while holding down ⌘ + R) and select the Reinstall macOS option from the menu. If the problem persists beyond this point, your next stop should be an appointment at the Genius Bar in an Apple Store.


As you can see, taking care of your Mac shouldn’t be difficult—two apps are enough. And if you have MacBook black screen or your MacBook Won’t Turn On Issue, go through the checklist above to fix the problem in a few minutes. If you have any queries regarding this, you can comment in the box, we will try to give you the best answer as soon as possible.